Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T21:37:16.010Z Has data issue: false hasContentIssue false

The stress tensor for simple shear flows of a granular material

Published online by Cambridge University Press:  26 April 2006

Charles S. Campbell
Affiliation:
University of Southern California, Department of Mechanical Engineering, Los Angeles, CA 90089–1453, USA

Abstract

The complete stress tensor has been measured using a computer simulation of an assemblage of rough, inelastic spheres in an imposed simple shear flow. Only five components of the stress tensor were found to be significantly different from zero. These represent the disperssive normal stresses τxx, τyy and τzz and the in-the-shear-plane shear stresses τxy and τyx; furthermore, the two off-diagonal stresses, τxy and τyx, were found to be equal so that the resultant stress tensor is symmetric. Two modes of microscopic momentum transport produce the final macroscopic stress tensor: the streaming or kinetic mode by which particles carry the momentum of their motion as they move through the bulk material, and the collisional mode by which momentum is transported by interparticle collisions. The contribution of each to the final result is examined separately. The friction coefficient, the ratio of shear to normal force, is shown to decrease at dense packings for both the collisional and streaming modes. Also observed were normal stress differences, both in and out of the shear plane, reflecting anisotropies in the granular temperature.

Information

Type
Research Article
Copyright
© 1989 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable