Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T01:59:57.632Z Has data issue: false hasContentIssue false

Structure of turbulent boundary layers on smooth and rough walls

Published online by Cambridge University Press:  26 April 2006

P.-Å. Krogstad
Affiliation:
Division of Mechanics, Thermo- and Fluid Dynamics, Norwegian Institute of Technology, N-7034 Trondheim, Norway
R. A. Antonia
Affiliation:
Department of Mechanical Engineering, University of Newcastle, NSW, 2308, Australia

Abstract

The structure of turbulent boundary layers which develop with zero pressure gradient on a smooth wall and a k-type rough wall was examined using arrays of X-wires. Although the data were obtained only on two orthogonal planes, the technique provides some information on the three-dimensionality of the large-scale structures. The major effect of the roughness is to tilt the inclination of the structures towards the wall-normal direction. This is caused by the reduced damping of the wall-normal velocity fluctuations close to the rough surface and the break-up of structures whose scales are comparable to the size of the roughness elements. Both effects cause a reduction in the streamwise lengthscales, as suggested by all the measured two-point correlations. The correlations also show that the roughness tends to reduce the overall anisotropy of the large-scale motion. There is evidence to suggest that the magnitude of the vorticity field is larger over the rough wall.

Information

Type
Research Article
Copyright
© 1994 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable