Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T23:24:27.832Z Has data issue: false hasContentIssue false

Successive bifurcations in a fully three-dimensional open cavity flow

Published online by Cambridge University Press:  12 April 2018

F. Picella
Affiliation:
DynFluid – Arts et Métiers ParisTech, 151Bd. de l’Hôpital, 75013 Paris, France
J.-Ch. Loiseau
Affiliation:
DynFluid – Arts et Métiers ParisTech, 151Bd. de l’Hôpital, 75013 Paris, France
F. Lusseyran
Affiliation:
LIMSI, CNRS, Université Paris-Saclay, Bat. 508, Rue John Von Neumann, Campus Universitaire, 91403 Orsay, France
J.-Ch. Robinet*
Affiliation:
DynFluid – Arts et Métiers ParisTech, 151Bd. de l’Hôpital, 75013 Paris, France
S. Cherubini
Affiliation:
DMMM, Politecnico di Bari, Via Re David 200, 70126 Bari, Italy
L. Pastur
Affiliation:
LIMSI, CNRS, Université Paris-Sud, Université Paris-Saclay, Bat. 508, Rue John Von Neumann, 91403 Orsay, France
*
†Email address for correspondence: jean-christophe.robinet@ensam.eu

Abstract

The transition to unsteadiness of a three-dimensional open cavity flow is investigated using the joint application of direct numerical simulations and fully three-dimensional linear stability analyses, providing a clear understanding of the first two bifurcations occurring in the flow. The first bifurcation is characterized by the emergence of Taylor–Görtler-like vortices resulting from a centrifugal instability of the primary vortex core. Further increasing the Reynolds number eventually triggers self-sustained periodic oscillations of the flow in the vicinity of the spanwise end walls of the cavity. This secondary instability causes the emergence of a new set of Taylor–Görtler vortices experiencing a spanwise drift directed toward the spanwise end walls of the cavity. While a two-dimensional stability analysis would fail to capture this secondary instability due to the neglect of the lateral walls, it is the first time to our knowledge that this drifting of the vortices can be entirely characterized by a three-dimensional linear stability analysis of the flow. Good agreements with experimental observations and measurements strongly support our claim that the initial stages of the transition to turbulence of three-dimensional open cavity flows are solely governed by modal instabilities.

Information

Type
JFM Papers
Copyright
© 2018 Cambridge University Press 
Figure 0

Figure 1.Picture of the experimental set-up at LIMSI (Orsay, France), as described by Faure et al. (2007).

Figure 1

Figure 2.Sketch of a three-dimensional open cavity flow, showing the geometrical features. The shaded areas highlight the walls where no-slip boundary conditions are imposed.

Figure 2

Table 1.Description of the boundary conditions, with reference to figure 2.

Figure 3

Figure 3.(a) Colour map of the velocity magnitude of the base flow at $Re=3300$ in the symmetry $z=0$ vertical plane. Only a subset of the whole computational domain is considered. (b) Visualization of the path lines of two particles located initially at $(x,y,z)=(0.5,-0.5,\pm 2.99)$. The incoming flow is directed toward the reader. The colour scale indicates the trajectory integration time.

Figure 4

Figure 4.(a) Eigenspectra of the linearized Navier–Stokes operator for $Re=3400$ (blue squares) and $Re=3475$ (red circles). The shaded region corresponds to the stable part of the complex plane. (b) Spanwise velocity isocontours of the leading unstable mode at $Re=3475$. (c) Motion induced by this mode in the $y=-0.5$ horizontal plane. The colour map depicts the amplitude of the out-of-plane (vertical) velocity component while the vectors show the in-plane motion.

Figure 5

Figure 5.Motion induced by the least unstable mode in the $y=-0.5$ horizontal plane at $Re=3475$. The colour map depicts the amplitude of the out-of-plane (vertical) velocity component while the vectors show the in-plane motion. Note that, contrary to the unstable mode, this one is characterized by a mirror antisymmetry.

Figure 6

Table 2.Contribution of the different production terms $I_{i}$ and the viscous dissipation $D$ to the total kinetic energy budget of the unstable mode at $Re=3500$.

Figure 7

Figure 6.Evolution of the perturbation’s kinetic energy as a function of time in the nonlinearly saturated regime at $Re=3500$. Note that the vertical axis has been re-scaled by a factor $10^{4}$. The red dots indicate the instants of time for which the corresponding helicity fields are depicted in figure 7.

Figure 8

Figure 7.Snapshots of the instantaneous helicity field $\boldsymbol{h}(\boldsymbol{x},t)=\unicode[STIX]{x1D74E}(\boldsymbol{x},t)\boldsymbol{\cdot }\boldsymbol{u}(\boldsymbol{x},t)$ at the different instants of time highlighted in figure 6 ($Re=3500$). The colour scale has been kept constant over the different figures.

Figure 9

Figure 8.Helicity field of the bifurcated base flow within the $y=-0.5$ horizontal plane. The Reynolds number is set to $Re=3700$.

Figure 10

Figure 9.(a) Eigenspectra of the linearized Navier–Stokes operator for $Re=3600$ (blue squares) and $Re=3800$ (red circles). The shaded region corresponds to the stable part of the complex plane. (b) Spanwise velocity isocontours of the leading unstable mode at $Re=3800$. (c) Motion induced by this mode in the $y=-0.5$ horizontal plane. The colour map depicts the amplitude of the out-of-plane (vertical) velocity component while the vectors show the in-plane motion.

Figure 11

Table 3.Contribution of the different production terms $I_{i}$ and the viscous dissipation $D$ to the total kinetic energy budget of the unstable mode at $Re=3800$.

Figure 12

Figure 10.Spanwise velocity of the adjoint eigenmode $\hat{\boldsymbol{u}}^{\dagger }$ associated with the eigenvalue $\unicode[STIX]{x1D706}=0.001\pm \text{i}0.049$ at $Re=3800$ in the $y=-0.5$ horizontal plane.

Figure 13

Figure 11.Sensitivity to base flow modification $\unicode[STIX]{x1D735}_{\boldsymbol{U}}\unicode[STIX]{x1D706}$ of the eigenvector $\hat{\boldsymbol{u}}$ associated with the eigenvalue $\unicode[STIX]{x1D706}=0.001\pm \text{i}0.049$ at $Re=3800$ in the $y=-0.5$ horizontal plane. Only the magnitude of real part of $\unicode[STIX]{x1D735}_{\boldsymbol{U}}\unicode[STIX]{x1D706}$ is shown, i.e. the sensitivity to base flow modification of the eigenvalue’s growth rate.

Figure 14

Figure 12.Experimental smoke visualization (a) (Faure et al.2007) and numerically computed streamlines (b). The visualization technique enhances the detection of mushroom-shaped Taylor–Görtler-like vortical structures. Top views in the $y=0.8$ plane.

Figure 15

Figure 13.Sketch of the evolution of the morphology of the inner cavity’s flow as a function of the Reynolds number. NoTG, STG and UTG stand for no Taylor–Görtler vortices, (quasi-) stationary Taylor–Görtler vortices and unsteady Taylor–Görtler vortices, respectively.

Figure 16

Table 4.Summary of the critical Reynolds numbers, spanwise wavelength and circular frequencies observed experimentally, and predicted by linear stability analyses. DNS and GLSA stand for direct numerical simulation and global linear stability analysis, respectively.

Figure 17

Figure 14.Numerical and experimental space–time diagrams of the pattern dynamics at $Re=3900$ along the line $(x,y)=(0.1,0.8)$. Streamwise velocity for DNS on the left, experimental smoke visualization on the right. The latter has been rectified using the constant asymmetrical drift velocity obtained for $Re_{C1}\leqslant Re\leqslant Re_{C2}$.