Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T07:21:27.092Z Has data issue: false hasContentIssue false

Superhydrophobic turbulent drag reduction as a function of surface grating parameters

Published online by Cambridge University Press:  23 April 2014

Hyungmin Park*
Affiliation:
Mechanical and Aerospace Engineering Department, University of California at Los Angeles (UCLA), Los Angeles, CA 90095, USA
Guangyi Sun*
Affiliation:
Mechanical and Aerospace Engineering Department, University of California at Los Angeles (UCLA), Los Angeles, CA 90095, USA
Chang-Jin “CJ” Kim*
Affiliation:
Mechanical and Aerospace Engineering Department, University of California at Los Angeles (UCLA), Los Angeles, CA 90095, USA
*
†Present address: Department of Mechanical & Aerospace Engineering, Seoul National University, Seoul 151-744, Korea.
‡Present address: Institute of Robotics and Automatic Information System, Nankai University, Tianjin Key Laboratory of Intelligent Robotics, Tianjin 300071, China.
§Email address for correspondence: cjkim@ucla.edu
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Despite the confirmation of slip flows and successful drag reduction (DR) in small-scaled laminar flows, the full impact of superhydrophobic (SHPo) DR remained questionable because of the sporadic and inconsistent experimental results in turbulent flows. Here we report a systematic set of bias-free reduction data obtained by measuring the skin-friction drags on a SHPo surface and a smooth surface at the same time and location in a turbulent boundary layer (TBL) flow. Each monolithic sample consists of a SHPo surface and a smooth surface suspended by flexure springs, all carved out from a $2.7 \times 2.7 {\mathrm{mm}}^{2}$ silicon chip by photolithographic microfabrication. The flow tests allow continuous monitoring of the plastron on the SHPo surfaces, so that the DR data are genuine and consistent. A family of SHPo samples with precise profiles reveals the effects of grating parameters on turbulent DR, which was measured to be as much as ${\sim }75\, \%$ .

Information

Type
Papers
Copyright
© 2014 Cambridge University Press 

Park et al. supplementary movie

Comparative displacement of a SHPo surface and a smooth surface measured in in a turbulent boundary layer flow (Reτ ~ 250) – 50× slower. It is clearly seen that the SHPo surface (50 μm pitch and 90% GF) is dragged less than a smooth counterpart in a turbulent flow which indicates a skin-friction drag reduction.

Download Park et al. supplementary movie(Video)
Video 828.8 KB
Supplementary material: PDF

Park et al. supplementary material

Park supplementary material

Download Park et al. supplementary material(PDF)
PDF 1.5 MB