Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T20:43:22.366Z Has data issue: false hasContentIssue false

The three-dimensional interaction of a streamwise vortex with a large-chord lifting surface: theory and experiment

Published online by Cambridge University Press:  26 April 2006

Gustavo C. R. Bodstein
Affiliation:
Department of Mechanical Engineering, EE/COPPE/UFRJ, CP 68503, CEP 21945-970, Rio de Janeiro, RJ, Brazil
Albert R. George
Affiliation:
Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853-7501, USA
C.-Y. Hui
Affiliation:
Theoretical and Applied Mechanics, Cornell University, Ithaca, NY 14853-7501, USA

Abstract

The three-dimensional vortex flow that develops around a close-coupled canard-wing configuration is characterized by a strong interaction between the vortex generated at the canard and the aircraft wing. In this paper, a theoretical potential flow model is devised to uncover the basic structure of the pressure and velocity distributions on the wing surface. The wing is modelled as a semi-infinite lifting-surface set at zero angle of attack. It is assumed that the vortex is a straight vortex filament, with constant strength, and lying in the freestream direction. The vortex filament is considered to be orthogonal to the leading-edge, passing a certain height over the surface. An incompressible and steady potential flow formulation is created based on the three-dimensional Laplace's equation for the velocity potential. The boundary-value problem is solved analytically using Fourier transforms and the Wiener-Hopf technique. A closed-form solution for the velocity potential is determined, from which the velocity and pressure distributions on the surface and a vortex path correction are obtained. The model predicts an anti-symmetric pressure distribution along the span in region near the leading-edge, and a symmetric pressure distribution downstream from it. The theory also predicts no vertical displacement of the vortex, but a significant lateral displacement. A set of experiments is carried out to study the main features of the flow and to test the theoretical model above. The experimental results include helium-soap bubble and oil-surface flow pattern visualization, as well as pressure measurements. The comparison shows good agreement only for a weak interaction case, whereas for the case where the interaction is strong, secondary boundary-layer separation and vortex breakdown are observed to occur, mainly owing to the strong vortex-boundary layer interaction. In such a case the model does not agree well with the experiments.

Information

Type
Research Article
Copyright
© 1996 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable