Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T07:29:01.771Z Has data issue: false hasContentIssue false

Tracer particle momentum effects in vortex flows

Published online by Cambridge University Press:  16 April 2013

David M. Birch*
Affiliation:
Department of Mechanical Engineering Sciences, University of Surrey, Guildford, Surrey GU2 7XH, UK
Nicholas Martin
Affiliation:
Department of Mechanical Engineering Sciences, University of Surrey, Guildford, Surrey GU2 7XH, UK
*
†Email address for correspondence: d.birch@surrey.ac.uk
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The measurement of vortex flows with particle-image velocimetry (PIV) is particularly susceptible to error arising from the finite mass of the tracer particles, owing to the high velocities and accelerations typically experienced. A classical model of Stokes-flow particle transport is adopted, and an approximate solution for the case of particle transport within an axisymmetric, quasi-two-dimensional Batchelor $q$ -vortex is presented. A generalized expression for the maximum particle tracking error is proposed for each of the velocity components, and the importance of finite particle size distributions is discussed. The results indicate that the tangential velocity component is significantly less sensitive to tracking error than the radial component, and that the conventional particle selection criterion (based on the particle Stokes number) may result in either over- or under-sized particles for a specified allowable error bound. Results were demonstrated by means of PIV measurements carried out in air and water using particles with very different properties.

Information

Type
Papers
Copyright
©2013 Cambridge University Press