Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T22:32:59.884Z Has data issue: false hasContentIssue false

Transcritical flow over two obstacles: forced Korteweg–de Vries framework

Published online by Cambridge University Press:  21 November 2016

Roger H. J. Grimshaw
Affiliation:
Department of Mathematics, University College London, London WC1E 6BT, UK
Montri Maleewong*
Affiliation:
Department of Mathematics, Faculty of Science, Kasetsart University, Bangkok 10900, Thailand
*
†Email address for correspondence: Montri.M@ku.ac.th

Abstract

We consider free-surface flow over two localised obstacles using the framework of the forced Korteweg–de Vries equation in a suite of numerical simulations. Our main concern is with the transcritical regime when the oncoming flow has a Froude number close to unity. The flow behaviour can be characterised by the Froude number and the maximum heights of the obstacles. In the transcritical regime at early times, undular bores are produced upstream and downstream of each obstacle. Our main aim is to describe the interaction of these undular bores between the obstacles, and to find the outcome at very large times. We find that the flow development can be defined in three stages. The first stage is described by the well-known development of undular bores upstream and downstream of each obstacle. The second stage is the interaction between the undular bore moving downstream from the first obstacle and the undular bore moving upstream from the second obstacle. The third stage is the very large time evolution of this interaction, when one of the obstacles controls criticality. For equal obstacle heights, our analytical and numerical results indicate that either one of the obstacles can control flow criticality, that being the first obstacle when the flow is slightly subcritical and the second obstacle otherwise. For unequal obstacle heights the larger obstacle controls criticality. The results obtained here complement a recent numerical study using the fully nonlinear, but non-dispersive, shallow water equations.

Information

Type
Papers
Copyright
© 2016 Cambridge University Press 
Figure 0

Figure 1.Simulations for $F=1.0,\unicode[STIX]{x1D6E5}=0,\unicode[STIX]{x1D716}_{1}=\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 1

Figure 2.Simulations for $F=1.2,\unicode[STIX]{x1D6E5}=0.2,\unicode[STIX]{x1D716}_{1}=\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 2

Figure 3.Simulations for $F=1.35,\unicode[STIX]{x1D6E5}=0.35,\unicode[STIX]{x1D716}_{1}=\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 3

Figure 4.Simulations for $F=1.4,\unicode[STIX]{x1D6E5}=0.4,\unicode[STIX]{x1D716}_{1}=\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 4

Figure 5.Simulations for $F=0.8,\unicode[STIX]{x1D6E5}=-0.2,\unicode[STIX]{x1D716}_{1}=\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 5

Figure 6.Simulations for $F=0.6,\unicode[STIX]{x1D6E5}=-0.4,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 6

Figure 7.Simulations for $F=0.4,\unicode[STIX]{x1D6E5}=-0.6,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 7

Figure 8.Simulations for $F=1.5,\unicode[STIX]{x1D6E5}=0.5,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.1$.

Figure 8

Figure 9.Simulations for $F=1.0,\unicode[STIX]{x1D6E5}=0,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.2$.

Figure 9

Figure 10.Simulations for $F=1.2,\unicode[STIX]{x1D6E5}=0.2,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.2$.

Figure 10

Figure 11.Simulations for $F=1.4,\unicode[STIX]{x1D6E5}=0.4,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.2$.

Figure 11

Figure 12.Simulations for $F=0.8,\unicode[STIX]{x1D6E5}=-0.2,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.2$.

Figure 12

Figure 13.Simulations for $F=0.6,\unicode[STIX]{x1D6E5}=-0.4,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.2$.

Figure 13

Figure 14.Simulations for $F=0.4,\unicode[STIX]{x1D6E5}=-0.6,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.2$.

Figure 14

Figure 15.Simulations for $F=1.0,\unicode[STIX]{x1D6E5}=0,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.05$.

Figure 15

Figure 16.Simulations for $F=1.2,\unicode[STIX]{x1D6E5}=0.2,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.05$.

Figure 16

Figure 17.Simulations for $F=1.4,\unicode[STIX]{x1D6E5}=0.4,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.05$.

Figure 17

Figure 18.Simulations for $F=0.8,\unicode[STIX]{x1D6E5}=-0.2,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.05$.

Figure 18

Figure 19.Simulations for $F=0.6,\unicode[STIX]{x1D6E5}=-0.4,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.05$.

Figure 19

Figure 20.Simulations for $F=0.4,\unicode[STIX]{x1D6E5}=-0.6,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.05$.

Figure 20

Figure 21.Simulations for $F=1.0,\unicode[STIX]{x1D6E5}=0,\unicode[STIX]{x1D716}_{1}=0.1,\unicode[STIX]{x1D716}_{2}=0.1$.