Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T00:45:41.764Z Has data issue: false hasContentIssue false

Transient force generation during impulsive rotation of wall-mounted panels

Published online by Cambridge University Press:  13 March 2013

Alexis Pierides
Affiliation:
Experimental Aerodynamics and Fluid Mechanics Laboratory, Mechanical Engineering, The City College of the City University of New York, New York, NY 10031, USA
Amir Elzawawy*
Affiliation:
Experimental Aerodynamics and Fluid Mechanics Laboratory, Mechanical Engineering, The City College of the City University of New York, New York, NY 10031, USA
Yiannis Andreopoulos
Affiliation:
Experimental Aerodynamics and Fluid Mechanics Laboratory, Mechanical Engineering, The City College of the City University of New York, New York, NY 10031, USA
*
†Email address for correspondence: amir.elzawawy@vaughn.edu
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Square and triangular shape actuator panels mounted on the wall of a wind tunnel beneath an air flow have been impulsively rotated with an angular velocity between 3 and $26~\mathrm{rad} ~{\mathrm{s} }^{- 1} $ . A custom-designed balance was used to measure the time-dependent lift and drag forces during the deployment of the actuator, the position of which was monitored by a digital encoder. The measured forces have been compensated for inertia effects which are significant. The results indicated that all lift and drag force coefficients during the transient deployment are different than the corresponding coefficients under stationary conditions at the same deployment angle. It was found that these dynamic effects are augmented with increasing velocity ratio $\mathit{Str}$ . The square actuator was found to have better aerodynamic performance than the triangular ones. Additional experiments within different boundary layers reveal that the generated unsteady forces on the moving panels are affected by the characteristics of the incoming boundary layers. The results showed that the thinner the boundary layer is the higher the forces are. Time-resolved flow visualization studies indicated that during the deployment of the panel the upstream turbulent boundary layer structures and the free stream fluid are decelerated and squeezed in the longitudinal direction as they approach the moving plate. A very thin and highly sheared wall layer develops over the moving panel, it generates a substantial amount of vorticity and it subsequently separates from the three edges of the panel to form a large-scale ring-like vortical structure which is responsible for the transient augmentation of the aerodynamic forces. This structure consists of wrapped around separated shear layers which contain pockets of compressed eddies and free stream fluid originated in the upstream incoming boundary layer and free stream. A horseshoe vortex starts to form over the moving plate and during the final stages of deployment it has been moved upstream while the incoming boundary layer turbulent structures are pushed and diverted upwards.

Information

Type
Papers
Copyright
©2013 Cambridge University Press

Pierides et al. supplementary movie

Flow visualization shows vortical structures shed off the tip of the actuator, during deployment, taken at x3=0 plane (Reθ=3,400; Reh=68,200; Str=0.24).

Download Pierides et al. supplementary movie(Video)
Video 2.2 MB

Pierides et al. supplementary movie

Flow visualization shows vortical structures shed off the tip of the actuator, during deployment, taken at x2=9 plane (Reθ=3,400; Reh=68,200; Str=0.24).

Download Pierides et al. supplementary movie(Video)
Video 2.5 MB

Pierides et al. supplementary movie

Flow visualization of the upstream interaction of the deploying actuator with the incoming boundary layer flow, (Reθ=3,400; Reh=68,200; Str=0.24).

Download Pierides et al. supplementary movie(Video)
Video 2.7 MB