Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T21:10:19.543Z Has data issue: false hasContentIssue false

Turbulence measurements using a nanoscale thermal anemometry probe

Published online by Cambridge University Press:  01 September 2010

SEAN C. C. BAILEY*
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
GARY J. KUNKEL
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
MARCUS HULTMARK
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
MARGIT VALLIKIVI
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
JEFFREY P. HILL
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
KARL A. MEYER
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
CANDICE TSAY
Affiliation:
Department of Electrical Engineering, Princeton University, Princeton, NJ 08544, USA
CRAIG B. ARNOLD
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
ALEXANDER J. SMITS
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
*
†Present address: Department of Mechanical Engineering, University of Kentucky, Lexington, KY 40515, USA. Email address for correspondence: scbailey@engr.uky.edu
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A nanoscale thermal anemometry probe (NSTAP) has been developed to measure velocity fluctuations at ultra-small scales. The sensing element is a free-standing platinum nanoscale wire, 100 nm × 2 μm × 60 μm, suspended between two current-carrying contacts and the sensor is an order of magnitude smaller than presently available commercial hot wires. The probe is constructed using standard semiconductor and MEMS manufacturing methods, which enables many probes to be manufactured simultaneously. Measurements were performed in grid-generated turbulence and compared to conventional hot-wire probes with a range of sensor lengths. The results demonstrate that the NSTAP behaves similarly to conventional hot-wire probes but with better spatial resolution and faster temporal response. The results are used to investigate spatial filtering effects, including the impact of spatial filtering on the probability density of velocity and velocity increment statistics.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2010