Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T16:04:17.019Z Has data issue: false hasContentIssue false

The turbulent boundary layer on a rotating cylinder in an axial stream

Published online by Cambridge University Press:  29 March 2006

T-S. Cham
Affiliation:
Cambridge University Engineering DepartmentPresent address: Faculty of Engineering, University of Singapore.
M. R. Head
Affiliation:
Cambridge University Engineering DepartmentPresent address: Indian Institute of Technology, Kanpur.

Abstract

Calculations are presented of the development of the turbulent boundary layer on a rotating cylinder with its axis along the stream, and the results are compared with measurements made by Parr. With the choice of a suitable co-ordinate system, the boundary layer downstream of the nose of the cylinder approximates closely to a condition of two-dimensionality, and a simple integral method of solution can be applied. The only evidence of three-dimensionality lies in the destabilizing effect of rotation on the turbulence structure of the layer and an analysis of this instability has been made which relates changes in mixing length and entrainment to an instability parameter in the form of a Richardson number.

In spite of the changes in shear stress distribution and entrainment brought about by rotation, mean velocity profiles and skin friction values are found to be related to H and Rθ in the same way as for the stationary flat plate.

Information

Type
Research Article
Copyright
© 1970 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable