Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T12:49:31.905Z Has data issue: false hasContentIssue false

Turbulent boundary layer over a compliant surface: absolute and convective instabilities

Published online by Cambridge University Press:  10 December 2001

K. S. YEO
Affiliation:
Department of Mechanical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Republic of Singapore
H. Z. ZHAO
Affiliation:
Institute of High Performance Computing, 89B Science Park Drive, #01-05/08 The Rutherford, Singapore 118261, Republic of Singapore
B. C. KHOO
Affiliation:
Department of Mechanical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Republic of Singapore
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A theoretical model for the instability of two-dimensional turbulent boundary layer over compliant surfaces is described. The principal Reynolds stress is modelled by a well-established mixing-length eddy-viscosity formulation of van Driest. The perturbations of the mean velocity and Reynolds stress fields are coupled via the turbulence model. The investigation of instability is carried out from a time-asymptotic spatio-temporal perspective that classifies instabilities as being either convective or absolute. The occurrence of convective and absolute instabilities over viscoelastic compliant layers is elucidated. Compliant surfaces with low damping are susceptible to convective instability, which gives way to an absolute instability when the surfaces become highly damped. The theoretical results are compared against experimental observations of surface waves on elastic and viscoelastic compliant layers.

Information

Type
Research Article
Copyright
© 2001 Cambridge University Press