Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T10:53:17.547Z Has data issue: false hasContentIssue false

Turbulent boundary layer under a solitary wave

Published online by Cambridge University Press:  25 November 2008

GIOVANNA VITTORI
Affiliation:
Department of Civil, Environmental and Architectural Engineering - University of Genoa, Via Montallegro 1, 16145 Genova, Italy
PAOLO BLONDEAUX
Affiliation:
Department of Civil, Environmental and Architectural Engineering - University of Genoa, Via Montallegro 1, 16145 Genova, Italy
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The boundary layer generated by the propagation of a solitary wave is investigated by means of direct numerical simulations of continuity and Navier–Stokes equations. The obtained results show that, for small wave amplitudes, the flow regime is laminar. Turbulence appears when the wave amplitude becomes larger than a critical value which depends on the ratio between the boundary-layer thickness and the water depth. Moreover, turbulence is generated only during the decelerating phase, or conversely, turbulence is present only behind the wave crest. Even though the horizontal velocity component far from the bed always moves in the direction of wave propagation, the fluid particle velocity near the bottom reverses direction as the irrotational velocity decelerates. The strength and length of time of flow reversal are affected by turbulence appearance. Also the bed shear stress feels the effects of turbulence presence.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2008