Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T04:29:17.821Z Has data issue: false hasContentIssue false

Two-dimensional and axisymmetric viscous flow in apertures

Published online by Cambridge University Press:  23 May 2008

SADEGH DABIRI
Affiliation:
Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA 92697, USA
WILLIAM A. SIRIGNANO
Affiliation:
Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA 92697, USA
DANIEL D. JOSEPH
Affiliation:
Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA 92697, USADepartment of Aerospace Engineering and Mechanics, University of Minnesota, Minneapolis, MN 55455, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The flow in a plane liquid jet from an aperture is obtained by direct simulation of the Navier–Stokes equations. The gas–liquid interface is tracked using the level set method. Flows are calculated for different Reynolds and Weber numbers. When We = ∞, the maximum value of the discharge coefficient appears around Re = O(100). The regions that are vulnerable to cavitation owing to the total stress are identified from calculations based on Navier–Stokes equations and viscous potential flow; the two calculations yield similar results for high Reynolds numbers. We prove that the classical potential flow solution does not give rise to a normal component of the rate of strain at the free streamline. Therefore, the normal component of the irrotational viscous stresses also vanishes and cannot change the shape of the free surface. The results of calculations of flows governed by the Navier–Stokes equations are close to those for viscous potential flow outside the vorticity layers at solid boundaries. The Navier–Stokes solutions for the axisymmetric aperture are also given for two values of Reynolds numbers. The results for axisymmetric and planar apertures are qualitatively similar, but the axisymmetric apertures have a lower discharge coefficient and less contraction.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2008