Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T10:06:04.577Z Has data issue: false hasContentIssue false

Viscoelastic inertial flow driven by an axisymmetric accelerated surface

Published online by Cambridge University Press:  21 April 2006

R. G. Larson
Affiliation:
AT & T Bell Laboratories, Murray Hill, NJ 07974, USA

Abstract

A similarity transform is used to analyse the flow of an upper-convected Maxwell fluid in an infinitely long cylinder whose surface has a velocity that increases in magnitude linearly with axial coordinate. Two types of problem are considered, the accelerated surface flow - when the surface velocity is outward towards the tube ends, and the decelerated surface flow - when it is inward. For the accelerated surface flow, the introduction of elasticity prevents the loss of similarity solution that occurs without elasticity at a Reynolds number (Re) of 10.25: with elasticity, solutions up to a Reynolds number of 95 were computed. As elasticity is introduced, normal stress gradients in an elastic boundary layer near the accelerated surface help offset inertially generated negative axial pressure gradients; with sufficient elasticity the turning point in the non-elastic solution family at Re = 10.25 disappears. For the decelerated surface flow, solutions could not be computed beyond a critical Re that depends on the level of elasticity considered, because at this critical Re, the axial velocity profile at the centreline becomes infinitely blunt.

Information

Type
Research Article
Copyright
© 1988 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable