Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T02:00:13.573Z Has data issue: false hasContentIssue false

The vortex-shedding process behind two-dimensional bluff bodies

Published online by Cambridge University Press:  20 April 2006

A. E. Perry
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville, Victoria 3052, Australia
M. S. Chong
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville, Victoria 3052, Australia
T. T. Lim
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville, Victoria 3052, Australia

Abstract

Using a variety of flow-visualization techniques, the flow behind a circular cylinder has been studied. The results obtained have provided a new insight into the vortex-shedding process. Using time-exposure photography of the motion of aluminium particles, a sequence of instantaneous streamline patterns of the flow behind a cylinder has been obtained. These streamline patterns show that during the starting flow the cavity behind the cylinder is closed. However, once the vortex-shedding process begins, this so-called ‘closed’ cavity becomes open, and instantaneous ‘alleyways’ of fluid are formed which penetrate the cavity. In addition, dye experiments also show how layers of dye and hence vorticity are convected into the cavity behind the cylinder, and how they are eventually squeezed out.

Information

Type
Research Article
Copyright
© 1982 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable