Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T06:30:09.869Z Has data issue: false hasContentIssue false

Vorticity forces on an impulsively startedfinite plate

Published online by Cambridge University Press:  25 January 2012

Jian-Jhih Lee
Affiliation:
Institute of Applied Mechanics and Taida Institute of Mathematical Sciences, National Taiwan University, Taipei 106, Taiwan, ROC
Cheng-Ta Hsieh
Affiliation:
Institute of Applied Mechanics and Taida Institute of Mathematical Sciences, National Taiwan University, Taipei 106, Taiwan, ROC
Chien C. Chang*
Affiliation:
Institute of Applied Mechanics and Taida Institute of Mathematical Sciences, National Taiwan University, Taipei 106, Taiwan, ROCDivision of Mechanics, Research Center for Applied Sciences, Academia Sinica, Taipei 115, Taiwan, ROC
Chin-Chou Chu*
Affiliation:
Institute of Applied Mechanics and Taida Institute of Mathematical Sciences, National Taiwan University, Taipei 106, Taiwan, ROC
*
†Email addresses for correspondence:mechang@iam.ntu.edu.tw, chucc@iam.ntu.edu.tw
†Email addresses for correspondence:mechang@iam.ntu.edu.tw, chucc@iam.ntu.edu.tw
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In this study, we consider various contributions to the forces on an impulsively started finite plate from the perspective of a diagnostic vorticity force theory. The wing plate has an aspect ratio (AR) between 1 and 3, and is placed at low and high angles of attack ($\ensuremath{\alpha} \leq $ and ${\gt }2{0}^{\ensuremath{\circ} } $), while the Reynolds number is either 100 or 300. The theory enables us to quantify the contributions to the forces exerted on the plate in terms of all of the fluid elements with non-zero vorticity, such as in the tip vortices (TiVs), leading- and trailing-edge vortices (LEV and TEV) as well on the plate surface. This line of force analysis has been pursued for two-dimensional flow in our previous studies. In contrast to the pressure force analysis (PFA), the vorticity force analysis (VFA) reveals new salient features in its applications to three-dimensional flow by examining sectional force contributions along the spanwise direction. In particular, at a large aspect ratio ($\mathit{AR}= 3$), the force distributions of PFA and VFA show close agreements with each other in the middle sections, while at a lower aspect ratio ($\mathit{AR}= 1$), the force distribution of PFA is substantially larger than that of VFA in most of the sections. The difference is compensated for by the contributions partly by the edge sections and mainly by the vortices in the outer regions. Further investigation is made fruitful by decomposing the vorticity into the spanwise (longitudinal) component (the only one in two-dimensional flow) and the other two orthogonal (transverse) components. The relative importance of the force contributions credited to the transverse components in the entire flow regions as well as in the two outer regions signifies the three-dimensional nature of the flow over a finite plate. The interplay between the LEV and the TiVs at various time stages is shown to play a key role in distinguishing the force contributions for the plate with a smaller aspect ratio and that with a larger aspect ratio. The present VFA provides a better perspective for flow control by relating the forces directly to the various sources of vorticity (or vortex structures) on or near the wing plate.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2012