Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T02:14:25.698Z Has data issue: false hasContentIssue false

An Automatic Snow Depth Meter By An Infrared Technique

Published online by Cambridge University Press:  30 January 2017

Tadashi Kimura*
Affiliation:
Institute of Snow and Ice Studies, National Research Center for Disaster Prevention, Suyoshi, Nagaoka-shi, Niigata-ken, Japan
Rights & Permissions [Opens in a new window]

Abstract

An automatic snow-depth meter was constructed using an infrared beam from a gallium-arsenide photo-emission diode and an infrared detector consisting of a silicon photocell. As the field of view of both photoelectric elements is 30°, high mechanical accuracy is not required. The equipment consists of two poles of the same size, 4.8 m high and 20 cm by 20 cm wide, an operation controller, and a digital recorder. The two poles were set up on the ground facing each other at a distance of 5 m. One pole has the photo-emission diode and the other the infrared detector. In each pole, a long slit 4 cm wide and 4 m long was installed. Through one slit the infrared beam comes out and is received through the other slit. To avoid catching snow or rain in the slits, air was ejected through them.

Information

Type
Abstracts of Papers Accepted for the Symposium but not Presented
Copyright
Copyright © International Glaciological Society 1975