Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T21:53:24.889Z Has data issue: false hasContentIssue false

Flexural Wave Studies on the Basis of Single-Sensor Recordings

Published online by Cambridge University Press:  30 January 2017

R. W. Taylor*
Affiliation:
Department of Geological Sciences, and Center for Great Lakes Studies, University of Wisconsin–Milwaukee, Milwaukee, Wisconsin 53201, U.S.A.
Rights & Permissions [Opens in a new window]

Abstract

The method described here provides a means of measuring flexural-wave dispersion and attenuation appropriate to a selected area, on the basis of single-sensor recordings made remote from the area of interest. The measured dispersion may then be inverted in the conventional manner to obtain thickness and elastic properties of the ice within the selected area. The procedure eliminates the need for equipment within the study area and minimizes the need for personnel within the area. As only a single sensor is necessary, the requirements for recording equipment and sensor cabling are also minimized. The method is suited to any study of flexural-wave dispersion from artificial sources and is ideally suited to the study of areas where personnel and equipment safety are a major concern.

Résumé

Résumé

La méthode décrite permet de mesurer la dispersion et l’atténuation des ondulations de flexion propre à un secteur choisi, à l’aide des enregistrements issus d’un capteur unique et réalisé à distance. La dispersion mesurée peut être traitée de manière conventionnelle pour en déduire l’épaisseur et les propriétés élastiques de la glace dans le secteur choisi. Cette méthode élimine la nécessité d’équiper la zone d’étude et réduit les besoins en personnels sur le terrain. Comme il n’est besoin que d’un seul capteur, le budget en matériel d’enregistrement et en câblage est également réduit. La méthode est adaptée à toute étude de dispersion d’ondulations de flexion depuis une source artificielle, et est parfaite pour l’étude de régions où la sécurité des personnels et du matériel constitue un souci majeur.

Zusammenfassung

Zusammenfassung

Die hier beschriebene Methode bietet ein Mittel zur Messung der Dispersion und Abschwächung von Biegewellen in einem ausgewählten Gebiet; sie beruht auf Aufzeichnungen mit einem Einzelsensor aus grösserer Entfernung vom Untersuchungsgebiet. Die gemessene Dispersion kann dann auf dem üblichen Wege zur Bestimmung der Dicke und der elastischen Eigenschaften des Eises im Untersuchungsgebiet verwendet werden. Dieses Vorgehen erspart den Einsatz von Geräten und bringt den Bedarf an Bodenpersonal auf ein Minimum. Da nur ein Einzelsensor benötigt wird, sind auch die Anforderungen an Registriergerät und Verkabelung äusserst gering. Die Methode eignet sich für jede Untersuchung der Dispersion von Biegewellen aus künstlichen Quellen, besonders in Gebieten, wo die Sicherheit von Personal und Gerät gefährdet ist.

Information

Type
Instruments and Methods
Copyright
Copyright © International Glaciological Society 1979
Figure 0

Fig. 1.The source–sensor geometry required for single-sensor measurements.

Figure 1

Fig. 2.Typical recordings resulting from the underwater detonation of blasting caps at A, the Pike Lake site and B, the Green Bay site.

Figure 2

Table I.Ice thickness, Young’s modules, and attenuation values

Figure 3

Fig. 3.Flexural-wave dispersion as determined from single-sensor recordings.

Figure 4

Fig. 4.Flexural-wave attenuation as determined from single-sensor recordings.