Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T07:09:38.480Z Has data issue: false hasContentIssue false

Combustion synthesis of AlN with melamine as an additive

Published online by Cambridge University Press:  01 March 2006

Gunchoo Shim*
Affiliation:
Korea Institute of Geoscience and Mineral Resources, Yusung-gu, Daejeon 305-350, Republic of Korea
Je-Shin Park
Affiliation:
Korea Institute of Geoscience and Mineral Resources, Yusung-gu, Daejeon 305-350, Republic of Korea
Sung-Wook Cho
Affiliation:
Korea Institute of Geoscience and Mineral Resources, Yusung-gu, Daejeon 305-350, Republic of Korea
*
a) Address all correspondence to this author. e-mail: gshim@kigam.re.kr
Get access

Abstract

Melamine (C3H6N6) was used as an additive for synthesizing aluminum nitride by combustion synthesis. It was found that at least 0.1 M of melamine addition to 1 M of aluminum and 0.8 MPa of nitrogen pressure were necessary to initiate a stable reaction. In addition to melamine, however, use of aluminum nitride as a diluent and application of forced nitrogen flow yielded better results. Analyzing the reaction temperatures, reaction rates, nitrogen contents, x-ray diffraction patterns, and scanning electron microscopy photographs, the optimum conditions for synthesizing AlN were established: (i) reactants were 90 wt% (1 M Al + 0.1 M melamine) + 10 wt% AlN diluent, (ii) chamber pressure was 0.9 MPa, and (iii) nitrogen flow rate was 15 l/min. Under these conditions, aluminum nitride with the stoichiometric nitrogen content of 34 wt% could be obtained.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable