Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T01:04:18.378Z Has data issue: false hasContentIssue false

Determination of grain boundary geometry using TEM

Published online by Cambridge University Press:  31 January 2011

H. Jang*
Affiliation:
Department of Materials Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061-0237
D. Farkas
Affiliation:
Department of Materials Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061-0237
J.T.M. De Hosson
Affiliation:
Department of Applied Physics, University of Groningen, Nijenborgh 18, 9747 AG, Groningen, The Netherlands
*
a)Current address: Department of Materials Science and Engineering, Technological Institute, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208-3180.
Get access

Abstract

An experimental method to obtain the grain boundary geometry using the transmission electron microscope is presented. The method allows Σ determination including grain boundary plane orientation. In order to determine the specialness of the grain boundary, three different criteria for maximum allowable deviations from exact CSL misorientations were examined. We tested these three criteria from a statistical distribution of grain boundary types in terms of Σ. We compared grain boundary distributions from other studies in Ni3Al and found discrepancies among them. It seems that the discrepancy came from the different criteria for special boundaries in Σ determination and different experimental procedures they used. The statistical distribution of grain boundary plane orientations showed that low Σ boundaries (Σ < 11) were oriented to the plane of high density of coincident sites.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable