Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T11:46:02.119Z Has data issue: false hasContentIssue false

Dynamic convection-driven thermal gradient chemical vapor infiltration

Published online by Cambridge University Press:  31 January 2011

John Y. Ofori
Affiliation:
Department of Chemical Engineering, University of Rochester, Rochester, New York 14627
Stratis V. Sotirchos*
Affiliation:
Department of Chemical Engineering, University of Rochester, Rochester, New York 14627
*
a) Author to whom correspondence should be addressed.
Get access

Abstract

The operation of the process of chemical vapor infiltration using a combination of pressure pulsing and thermal gradients is theoretically investigated in this study. Past studies had shown that pulsing of the pressure in the gas phase can lead to a dramatic reduction of the density gradients in the densifying structure, in comparison to those seen in isobaric diffusion-driven Pinfiltration, with significant gradients present only in the vicinity of the external surface of the preforms. Using a detailed model for chemical vapor infiltration under unsteady nonisothermal conditions, we show that temperature gradients, created in our study through microwave heating, can, in conjunction with pressure pulsing, eliminate the density gradients in the final product. Moreover, appropriate tuning of the operational parameters can lead to a situation where densification proceeds from the interior of the preform toward the external surface.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable