Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T14:09:37.795Z Has data issue: false hasContentIssue false

Effects of sequential He+ and Ar+ implantation on surface properties of polymers

Published online by Cambridge University Press:  31 January 2011

Gopal R. Rao
Affiliation:
Oak Ridge National Laboratory, Bldg. 5500, MS 6376, Oak Ridge, Tennessee 37831–6376
Eal H. Lee
Affiliation:
Oak Ridge National Laboratory, Bldg. 5500, MS 6376, Oak Ridge, Tennessee 37831–6376
Get access

Abstract

Three important polymers: polystyrene (PS), poly ether ether ketone (PEEK), and polyimide Kapton, were irradiated separately with 1 MeV He+, 1 MeV Ar+, and 1 MeV He+ followed by 1 MeV Ar+ sequentially, to a fluence of 3 × 1019 ions/m2 for each ion. The specimens were characterized for changes in surface hardness using a nanoindentation technique, and wear resistance using a reciprocating sliding wear apparatus with a steel ball counterface. Results indicated that while all polymers showed higher hardness values after ion irradiation, the dual irradiation resulted in the largest hardness increase, greater than for the single ion-irradiated specimens. Wear test results also indicated that the dual He+ + Ar+ irradiation resulted in the best improvement in wear resistance of the polymers. These improvements in properties are a consequence of cross-linking of the polymer material caused by the ion irradiation. Linear energy transfer considerations showed that the dual He+ + Ar+ implantation was better because it combined a deeper implant, in the form of He, along with Ar irradiation which resulted in a shallower but more highly cross-linked layer at the near surface. Thus a deeper and graded cross-linked surface region was formed. The study shows that there is greater flexibility for tailoring surface properties of polymers by using a judicious combination of ion species, ion energies, and fluences.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable