Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T06:13:14.791Z Has data issue: false hasContentIssue false

Electrodeposition of eutectic Sn–Zn alloy by pulse plating

Published online by Cambridge University Press:  31 January 2011

Kwang-Lung Lin*
Affiliation:
Department of Materials Science and Engineering, National Cheng Kung University, Tainan, Taiwan 701, Republic of China
Li-Min Sun
Affiliation:
Department of Materials Science and Engineering, National Cheng Kung University, Tainan, Taiwan 701, Republic of China
Get access

Abstract

A uniform deposition of a Sn–Zn alloy deposit was achieved by pulse plating. Apparently, the relative composition of Sn and Zn in the deposit was affected by the bath compositions and pulse condition. A pulse-plating condition of 99.9 ms on-time and 1.0 ms off-time gave rise to a eutectic Sn–Zn deposit, with a eutectic temperature of 198.8 °C (as analyzed by differential scanning calorimetry) and a uniform composition distribution across the deposit. A mechanism for explaining the pulse-deposition behavior of the Sn–Zn eutectic deposit was proposed. A longer off-time period, 99.9 ms versus 0.1 ms, resulted in a nodular, yet thinner deposit.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable