Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T05:18:15.883Z Has data issue: false hasContentIssue false

Failure of curved brittle layer systems from radial cracking in concentrated surface loading

Published online by Cambridge University Press:  03 March 2011

Matthew Rudas
Affiliation:
School of Mechanical Engineering, The University of Western Australia, Crawley, Western Australia 6009, Australia
Tarek Qasim
Affiliation:
School of Mechanical Engineering, The University of Western Australia, Crawley, Western Australia 6009, Australia
Mark B. Bush
Affiliation:
School of Mechanical Engineering, The University of Western Australia, Crawley, Western Australia 6009, Australia
Brian R. Lawn*
Affiliation:
Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8500
*
a)Address all correspondence to this author. e-mail: brian.lawn@nist.gov
Get access

Abstract

A study was made of radial crack evolution in curved brittle layers on compliant support substrates. Three-dimensional boundary element analysis was used to compute the stepwise growth of radial cracks that initiate at the bottom surfaces of glass on polymeric support layers, from initiation to final failure. The algorithm calculates reconstituted displacement fields in the near-tip region of the extending cracks, enabling direct evaluation of stress-intensity factors. Available experimental data on the same material systems with prescribed surface curvatures were used to validate the essential features of the predicted crack evolution, particularly the stability conditions prior to ultimate failure. It was shown that the critical loads to failure diminish with increasing surface curvature. Generalization of the ensuing fracture mechanics to include alternative brittle-layer/polymer-substrate systems enabled an explicit expression for the critical load to failure in terms of material properties and layer thicknesses. Implications concerning practical layer systems, particularly dental crowns, are briefly discussed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable