Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T21:17:28.760Z Has data issue: false hasContentIssue false

Flame-made Ceria Nanoparticles

Published online by Cambridge University Press:  31 January 2011

L. Mädler
Affiliation:
Institute of Process Engineering, ETH Zürich, CH-8092 Zürich, Switzerland
W. J. Stark
Affiliation:
Institute of Process Engineering, ETH Zürich, CH-8092 Zürich, Switzerland
S. E. Pratsinis*
Affiliation:
Institute of Process Engineering, ETH Zürich, CH-8092 Zürich, Switzerland
*
a)Address all correspondence to this author. e-mail: pratsinis@ivuk.mavt.ethz.ch
Get access

Abstract

Flame spray pyrolysis (FSP) has been used to synthesize high-surface-area ceria from cerium acetate in acetic acid solution. With the addition of an iso-octane/2-butanol mixture to that solution, homogeneous CeO2 nanoparticles were obtained. The specific surface area of the powders ranged from 240 to 101 m2/g by controlling the oxygen dispersion and liquid precursor flow rates through the flame. Furthermore, for production rates from 2 to 10 g/h a constant average primary particle size could be obtained at selected process parameters. The ceria showed high crystallinity and primary particles with a stepped surface. The powder exhibited good thermal stability and conserved up to 40% of its initial specific surface area when calcinated for 2 h at 900 °C. This shows the potential of FSP made ceria for high-temperature applications as in three-way catalysts or fuel cells.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable