Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T08:43:38.084Z Has data issue: false hasContentIssue false

Impression creep of a viscous layer

Published online by Cambridge University Press:  31 January 2011

Hong Chen
Affiliation:
Department of Mechanical Engineering, University of Rochester, Rochester, New York 14627
J. C. M. Li
Affiliation:
Department of Mechanical Engineering, University of Rochester, Rochester, New York 14627
Get access

Abstract

Impression creep of a flat-ended cylindrical punch pushed into a viscous layer overlaid on a rigid substrate is analyzed. The method developed here permits us to relate the impression velocity to the punching stress in terms of an auxiliary function, which represents the solution of a set of Fredholm integral equations with a continuous symmetrical kernel. By a series of numerical analysis, the influence of the boundary conditions and the effect of the thickness of the layer on the impression velocity are obtained. For infinite thickness (i.e., h/a →∞, where h is the thickness of the layer and a is the radius of the punch), the impression creep is independent of the stick or slip boundary condition at the indenter/layer interface. For finite thickness such as h/a = 20, the boundary conditions have about 5% effect on the impression velocity. For a thin film, the impressing velocity is very sensitive to the boundary conditions. In fact it suggests a possible experimental way to detect debonding at the interface between the thin film and the substrate.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable