Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T07:26:50.664Z Has data issue: false hasContentIssue false

Interface control and design for SiC fiber-reinforced titanium aluminide composites

Published online by Cambridge University Press:  31 January 2011

Hsing-Pang Chiu
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, California 90024–1595
S.M. Jeng
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, California 90024–1595
J-M. Yang
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, California 90024–1595
Get access

Abstract

The effectiveness of several coating systems which were used as a diffusion barrier for the SiC fiber-reinforced titanium aluminide composites was investigated. TaC, TiC, TiB2, B, C/graded TiB2, and Ag/Ta were applied to the SiC fiber via chemical vapor deposition and physical vapor deposition. The interfacial compatibility, interfacial stability, thermal residual stress, interfacial bond strength, and the transverse fracture behavior of the composites with coated fibers were characterized and determined. The results show that none of the above coating systems can satisfy the requirements for a strong, tough, and damage-tolerant SiC fiber-reinforced titanium aluminide composite. Several multilayer, multifunctional coating systems are proposed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable