Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T14:49:05.464Z Has data issue: false hasContentIssue false

Interfacial adhesion of nanoporous zeolite thin films

Published online by Cambridge University Press:  01 February 2006

Lili Hu
Affiliation:
Department of Mechanical Engineering, University of California, Riverside, California 92521
Junlan Wang*
Affiliation:
Department of Mechanical Engineering, University of California, Riverside, California 92521
Zijian Li
Affiliation:
Department of Chemical and Environmental Engineering, University of California, Riverside, California 92521
Shuang Li
Affiliation:
Department of Chemical and Environmental Engineering, University of California, Riverside, California 92521
Yushan Yan
Affiliation:
Department of Chemical and Environmental Engineering, University of California, Riverside, California 92521
*
a)Address all correspondence to this author. e-mail: wang@engr.ucr.edu
Get access

Abstract

Nanoporous silica zeolite thin films are promising candidates for future generation low-dielectric constant (low-k) materials. During the integration with metal interconnects, residual stresses resulting from the packaging processes may cause the low-k thin films to fracture or delaminate from the substrates. To achieve high-quality low-k zeolite thin films, it is important to carefully evaluate their adhesion performance. In this paper, a previously reported laser spallation technique is modified to investigate the interfacial adhesion of zeolite thin film-Si substrate interfaces fabricated using three different methods: spin-on, seeded growth, and in situ growth. The experimental results reported here show that seeded growth generates films with the highest measured adhesion strength (801 ± 68 MPa), followed by the in situ growth (324 ± 17 MPa), then by the spin-on (111 ± 29 MPa). The influence of the deposition method on film–substrate adhesion is discussed. This is the first time that the interfacial strength of zeolite thin films-Si substrates has been quantitatively evaluated. This paper is of great significance for the future applications of low-k zeolite thin film materials.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable