Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T01:52:29.073Z Has data issue: false hasContentIssue false

Interfacial Bonding Behavior with Introduction of Sn–Zn–Bi Paste to Sn–Ag–Cu Ball Grid Array Package During Multiple Reflows

Published online by Cambridge University Press:  03 March 2011

Po-Cheng Shih
Affiliation:
Department of Materials Science and Engineering, National Cheng-Kung University, Tainan, Taiwan 701, Republic of China
Kwang-Lung Lin
Affiliation:
Department of Materials Science and Engineering, National Cheng-Kung University, Tainan, Taiwan 701, Republic of China
Get access

Abstract

Sn–8Zn–3Bi solder paste and Sn–3.2Ag–0.5Cu solder balls were reflowed simultaneously on Cu/Ni/Au metallized ball grid array (BGA) substrates to investigate the interfacial bonding behaviors for multiple reflow cycles at two different soldering temperature of 210 and 240 °C. The different intermetallic compounds that formed at the interface after one reflow cycle were respectively the island-shaped Ag–Au-Cu-Zn (near the solder) compounds and the Ni–Sn–Cu-Zn (near the metallized pad) compounds in 210 or 240 °C soldering systems. Layered Ag–Au–Cu–Zn, Ag5Zn8, and Ag–Zn–Sn compounds were also observed within the solder near the interface after single reflow cycle. After ten reflow cycles, the Ag–Au–Cu–Zn compounds significantly decomposed, while the Ag3Sn and Ni–Sn–Cu–Zn compounds coarsened obviously.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable