Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T14:49:40.793Z Has data issue: false hasContentIssue false
  • English
  • Français

Melt-infiltration processing of TiC/Ni3Al composites

Published online by Cambridge University Press:  31 January 2011

K. P. Plucknett,
P. F. Becher and
R. Subramanian
K. P. Plucknett
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831
P. F. Becher
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831
R. Subramanian
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831
Get access

Abstract

A simple melt-infiltration processing route has been developed for the fabrication of TiC/Ni3Al ceramic/intermetallic composites, which involves a combination of infiltration and subsequent liquid phase sintering. For Ni3Al contents from 8 to 25 vol. %, densities in excess of 98% of theoretical are readily obtained when processing at 1450 °C. TiC and Ni3Al are the only phases detected in the densified materials. Ni3Al ductility is retained after processing, leading to the possibility of ductile phase toughened TiC composites for elevated temperature applications (up to ∼1100 °C).

Information

Type
Articles
Information
Journal of Materials Research , Volume 12 , Issue 10 , October 1997, pp. 2515 - 2517
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1.Kristic, V. V. and Komac, M., Philos. Mag. A 51, 191–203 (1985).CrossRefGoogle Scholar
2.Sigl, L. S., Mataga, P. A., Dalgleish, B. J., McMeeking, R. M., and Evans, A. G., Acta Metall. 36, 945–953 (1988).CrossRefGoogle Scholar
3.Toy, C. and Scott, W. D., J. Am. Ceram. Soc. 73, 97–101 (1990).CrossRefGoogle Scholar
4.Muscat, D., Harris, R. L., and Drew, R. A. L., Acta Metall. Mater, 42, 4155–4163 (1994).CrossRefGoogle Scholar
5.Gonzalez, E. J. and Trumble, K. P., J. Am. Ceram. Soc. 79, 114–120 (1996).CrossRefGoogle Scholar
6.Rödel, J., Prielipp, H., Claussen, N., Sternitzke, M., Alexander, K. B., Becher, P. F., and Schneibel, J. H., Scripta Metall. 33 (5), 843–848 (1995).CrossRefGoogle Scholar
7.Mehan, R. L., Hillig, W. B., and Morelock, C. R., Ceram. Eng. Sci. Proc. 1, 405–418 (1980).CrossRefGoogle Scholar
8.Washburn, E. W., Phys. Rev. 17, 273–283 (1921).CrossRefGoogle Scholar
9.Muscat, D. and Drew, R. A. L., J. Mater. Sci. Lett. 12, 1567–1569 (1993).CrossRefGoogle Scholar
10.Tumanov, A. V., Gostev, Y. V., Panov, V. S., and Kots, Y. F., Sov. Powder Metal. Met. Ceram. 25, 428 (1986).CrossRefGoogle Scholar
11.Alexander, K. B., Schneibel, J. H., Tiegs, T. N., Lin, H. T., and Becher, P. F., in Advanced Industrial Materials Program Report, ORNL/TM-12666 (1993), p. 241.Google Scholar
12.Subramanian, R., Schneibel, J. H., Alexander, K. B., and Plucknett, K. P., Scr. Mater. 35, 583–588 (1996).CrossRefGoogle Scholar
13.Kerans, R. J., Mazdiyasni, K. S., Ruh, R., and Lipsitt, H. A., J. Am. Ceram. Soc. 67, 34–38 (1984).CrossRefGoogle Scholar
14.Ochiai, S., Oya, Y., and Suzuki, T., Acta Metall. 32, 289–298 (1984).CrossRefGoogle Scholar
15.Kim, M. S., Hanada, S., Watanabe, S., and Izumi, O., Acta Metall. 36, 2615–2626 (1988).CrossRefGoogle Scholar
16.Mishima, Y., Ochiai, S., Yodagawa, Y. M., and Suzuki, T., Trans. JIM 27, 41–50 (1986).CrossRefGoogle Scholar
17.Ishikawa, K., Aoki, K., and Matsumoto, T., in High-Temperature Ordered Intermetallic Alloys VI, edited by Horton, J. A., Baker, I., Hanada, S., Noebe, R. D., and Schwartz, D. (Mater. Res. Soc. Symp. Proc. 364, Pittsburgh, PA, 1995), p. 837.Google Scholar
18.Huang, S. C., Taub, A. I., and Chang, K. M., J. Mater. Res. 1, 60–67 (1986).CrossRefGoogle Scholar
19.Schuster, J. C. and Nowotny, H., Monatshefte für Chemie 113, 163–170 (1982).CrossRefGoogle Scholar
20.Schneibel, J. H., personal communication.Google Scholar
21.Becher, P. F. and Plucknett, K. P., J. Eur. Ceram. Soc. (1997, in press).Google Scholar
22.Plucknett, K. P., Becher, P. F., and Waters, S. B., “Flexure Strength Behavior of Melt-Infiltration Processed TiC/Ni3Al Composites,” submitted to J. Am. Ceram. Soc.Google Scholar