Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T18:03:31.205Z Has data issue: false hasContentIssue false

Nanoindentation of Polymers with a Sharp Indenter

Published online by Cambridge University Press:  01 June 2005

C.Y. Zhang
Affiliation:
Department of Materials Science and Engineering, National University of Singapore, Singapore 119260, Singapore
Y.W. Zhang*
Affiliation:
Department of Materials Science and Engineering, National University of Singapore, Singapore 119260, Singapore
K.Y. Zeng
Affiliation:
Department of Mechanical Engineering, National University of Singapore, Singapore 119260, Singapore
L. Shen
Affiliation:
Institute of Materials Research and Engineering, Singapore 117602, Singapore
*
a) Address all correspondence to this author. e-mail: msezyw@nus.edu.sg
Get access

Abstract

A five-step indentation scheme is proposed to extract the elastic and viscoelastic properties of polymeric materials using a sharp indenter. In the formulation, analytical solutions to the elastic-viscoelastic deformation based on the concept of “effective indenters” proposed by both Pharr and Bolshakov [Understanding nanoindentation unloading curves. J. Mater. Res.17, 2660 (2002)] and Sakai [Elastic recovery in the unloading process of pyramidal microindentation. J. Mater. Res.18, 1631 (2003)] were derived. Indentation experiments on polymethylmethacrylate following the five-step scheme were performed. The elastic-viscoelastic parameters were extracted by fitting the solution based on Sakai’s effective indenter to the experimental results using a genetic algorithm. It was found that the solution based on Sakai's effective indenter was able to correctly extract the elastic properties. Based on this prediction and the experimental results, Pharr and Bolshakov's effective indenter profile could be determined. The extracted elastic-viscoelastic parameters using the solution based on Pharr and Bolshakov's effective indenter were independent of the reloading levels.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable