Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T09:30:36.998Z Has data issue: false hasContentIssue false

Oxidation behavior of aluminum nitride

Published online by Cambridge University Press:  31 January 2011

A. Bellosi
Affiliation:
CNR-IRTEC, Research Institute for Ceramics Technology, Faenza, Italy
E. Landi
Affiliation:
CNR-IRTEC, Research Institute for Ceramics Technology, Faenza, Italy
A. Tampieri
Affiliation:
CNR-IRTEC, Research Institute for Ceramics Technology, Faenza, Italy
Get access

Abstract

The evaluation of the thermal stability of three different fully dense AlN materials in the temperature range of 600 °C to 1400 °C in air indicates the strong effect of the starting composition on the oxidation process. The oxidation resistance of pure AlN and Y2O3-doped AlN was found to be good up to ≍1350 °C. The kinetics are linear (1100 ≤ T ≤ 1400 °C) and the process is governed by a surface reaction that gives rise to the formation of a porous, nonprotective oxide scale, where Al2O3 and Y-aluminates (i.e., AlN–Y2O3) have been found as crystalline reaction products. For AlN-CaC2, higher oxidation rates indicate that the outward migration of Ca modifies the reaction mechanisms. Linear kinetics in the range 1100 ≤ T ≤ 1200 °C are followed by parabolic kinetics at higher temperatures (T > 1250 °C); with regard to the latter behavior, an activation energy of 160 kJ/mole could indicate the diffusion of oxygen through the oxidation scale as the rate-controlling mechanism.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable