Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T10:58:20.873Z Has data issue: false hasContentIssue false

Partial agglomeration during Co silicide film formation

Published online by Cambridge University Press:  31 January 2011

Z.G. Xiao
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695-7916
G.A. Rozgonyi
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695-7916
C.A. Canovai
Affiliation:
Department of Electrical and Computer Engineering, North Carolina State University, Raleigh, North Carolina 27695-7911
C.M. Osburn*
Affiliation:
Department of Electrical and Computer Engineering, North Carolina State University, Raleigh, North Carolina 27695-7911
*
a)MCNC, Center for Microelectronics, Research Triangle Park, North Carolina 27709.
Get access

Abstract

The agglomeration of Co silicide films formed on Si substrates processed with evaporated Co film thicknesses from 9 to 28 nm was investigated by TEM and four-point-probe resistivity measurements. It was found that the upper portion of a reacting Co or Co silicide film can agglomerate independently from the main body of the silicide layer. This phenomenon is designated partial agglomeration in contrast to whole film agglomeration which generally occurs at higher temperatures. Partial agglomeration appears to develop more extensively for thinner films and poses a serious limitation for the application of thin silicide contact layers for advanced VLSI devices. The formation mechanism of partial agglomeration and the reason for its variation with film thickness are explained on the basis of a previously presented [MRS Proc. Vol. 202, p. 101 (1991)] theoretical model of grain boundary grooving and the onset of islanding in silicide films. Kirkendall voids and phase transformation induced volume changes play an important role in the process.

Information

Type
Communications
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable