Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T11:57:40.649Z Has data issue: false hasContentIssue false

Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements

Published online by Cambridge University Press:  31 January 2011

J.M. Meza
Affiliation:
Grupo de Investigación en Nuevos Materiales, Universidad Pontificia Bolivariana, Medellín, Antioquia 333, Colombia
F. Abbes
Affiliation:
Laboratoire de Microscopies et d’Etude de Nanostructures, EA 3799, Université de Reims Champagne-Ardenne, 51685 Reims Cedex 2, France
M. Troyon*
Affiliation:
Laboratoire de Microscopies et d’Etude de Nanostructures, EA 3799, Université de Reims Champagne-Ardenne, 51685 Reims Cedex 2, France
*
a)Address all correspondence to this author. e-mail: michel.troyon@univ-reims.fr
Get access

Abstract

Dimensional analysis is used to show that the maximum penetration depth and the tip radius affect the β correction factor appearing in the Sneddon relationship between unloading contact stiffness, contact area, and elastic modulus. A simple analytical model based on elasticity theory is derived that predicts the variation of β with penetration depth. This model shows that β increases at low penetration depth and decreases with the tip radius. The β(h) curve given by the model is compared with that calculated by finite element analysis for an elastic material and also with that deduced from experimental measurements performed on fused quartz with two Berkovich indenters: a sharp one and a blunted one. It is also demonstrated that the correction factor can be expressed as two multiplicative contributions, a contribution related to the mechanical properties of the material and a contribution related to the indenter geometry. Implications of these findings on nanoindentation test are also discussed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable