Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T13:09:29.066Z Has data issue: false hasContentIssue false

Phase formation and stability in sputter deposited Be–Nb compounds

Published online by Cambridge University Press:  29 June 2016

J. L. Brimhall
Affiliation:
Pacific Northwest Laboratory, Battelle Memorial Institute, Richland, Washington 99352
L. A. Charlot
Affiliation:
Pacific Northwest Laboratory, Battelle Memorial Institute, Richland, Washington 99352
S. M. Bruemmer
Affiliation:
Pacific Northwest Laboratory, Battelle Memorial Institute, Richland, Washington 99352
Get access

Abstract

The phase relations and thermal stabilities of phases in sputter deposited Be–Nb alloys (3–14% Nb) have been studied. An amorphous phase forms during deposition at ambient temperatures (30 °C) for compositions >5% Nb. Metastable crystalline phases form during deposition at 350–450 °C as well as during annealing of the amorphous phase. One metastable bcc phase designated as Be12Nb′ can be explained by an extremely high fault density in the Be12Nb structure and is a precursor phase to the formation of both Be12Nb and Be17Nb2. Another metastable bcc phase also forms during high temperature deposition. Transformation to the equilibrium phases occurs at temperatures >800 °C. A stoichiometric range of about 5.5–7.8% is indicated for the Be12Nb phase and is probably due to vacancies on the Nb sublattice. No evidence of a Be5Nb phase was found and the Be17Nb2 phase is stable to room temperature.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable