Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T06:45:47.330Z Has data issue: false hasContentIssue false

Representative Strain of Indentation Analysis

Published online by Cambridge University Press:  01 August 2005

Nagahisa Ogasawara
Affiliation:
Department of Civil Engineering and Engineering Mechanics, Columbia University, New York, New York 10027-6699; and Department of Mechanical Engineering, National Defense Academy, Hashirimizu, Yokosuka 239, Japan
Norimasa Chiba
Affiliation:
Department of Mechanical Engineering, National Defense Academy, Hashirimizu, Yokosuka 239, Japan
Xi Chen*
Affiliation:
Department of Civil Engineering and Engineering Mechanics, Columbia University, New York, New York 10027-6699
*
a)Address all correspondence to this author. e-mail: xichen@civil.columbia.edu
Get access

Abstract

Indentation analysis based on the concept of representative strain offers an effective way of obtaining mechanical properties, especially work-hardening behavior of metals, from reverse analysis of indentation load–displacement data, and does not require measuring of the projected contact area. The definition of representative strain adopted in previous studies [e.g., Dao et al., Acta Mater.49, 3899 (2001)] has a weak physical basis, and it works only for a limited range in some sense of engineering materials. A new indentation stress-state based formulation of representation is proposed in this study, which is defined as the plastic strain during equi-biaxial loading. Extensive numerical analysis based on the finite element method has shown that with the new formulation of representative strain and representative stress, the critical normalized relationship between load and material parameters is essentially independent of the work-hardening exponent for all engineering materials, and the results also hold for three distinct indenter angles. The new technique is used for four materials with mechanical properties outside the applicable regime of previous studies, and the reverse analysis has validated the present analysis. The new formulation based on indentation stress-state based definition of representative strain has the potential to quickly and effectively measure the mechanical properties of essentially all engineering materials as long as their constitutive behavior can be approximated into a power-law form.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable