Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T20:29:45.256Z Has data issue: false hasContentIssue false

Semi-inverse method for predicting stress–strain relationship from cone indentations

Published online by Cambridge University Press:  31 January 2011

A. DiCarlo
Affiliation:
Department of Mechanical and Environmental Engineering, University of California, Santa Barbara, California 93106
H. T. Y. Yang
Affiliation:
Department of Mechanical and Environmental Engineering, University of California, Santa Barbara, California 93106
S. Chandrasekar
Affiliation:
School of Industrial Engineering, Purdue University, West Lafayette, Indiana 47907
Get access

Abstract

A method for determining the stress–strain relationship of a material from hardness values H obtained from cone indentation tests with various apical angles is presented. The materials studied were assumed to exhibit power-law hardening. As a result, the properties of importance are the Young's modulus E, yield strength Y, and the work-hardening exponent n. Previous work [W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992)] showed that E can be determined from initial force–displacement data collected while unloading the indenter from the material. Consequently, the properties that need to be determined are Y and n. Dimensional analysis was used to generalize H/E so that it was a function of Y/E and n [Y-T. Cheng and C-M. Cheng, J. Appl. Phys. 84, 1284 (1999); Philos. Mag. Lett. 77, 39 (1998)]. A parametric study of Y/E and n was conducted using the finite element method to model material behavior. Regression analysis was used to correlate the H/E findings from the simulations to Y/E and n. With the a priori knowledge of E, this correlation was used to estimate Y and n.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable