Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T03:52:57.642Z Has data issue: false hasContentIssue false

Superplasticicity of Cu–16 at.% Ag microcomposites

Published online by Cambridge University Press:  31 January 2011

S. I. Hong
Affiliation:
Department of Metallurgical Engineering, Chungnam National University, Taedok Science Town, Taejon 305-764, Korea
H. J. Kwon
Affiliation:
Department of Metallurgical Engineering, Chungnam National University, Taedok Science Town, Taejon 305-764, Korea
Get access

Abstract

Superplastic behavior of heavily drawn Cu–at.% Ag filamentary microcomposite wires was investigated. The filamentary microstructure tended to break up at high temperatures by spheroidization, grooving, and/or recrystallization because of its high interface energy and high cold-work energy. Above 400 °C, extensive recrystallization occurred and the grains 300–500 nm in size were observed in the Cu matrix. As the deformation proceeded, the elongated silver lamellae and/or the region with numerous filaments broke up and rearranged into chevron patterns, which mostly lay perpendicular to the loading axis. The elongation up to 1000% was obtained at 500 °C at the strain rates of 7 × 10−4/s and −3 × 10−3/s, and the elongation up to 600% was obtained at 400 °C at the strain rate of 1 × 10−4/s. Arrays of dislocations in the matrix and near grain and phase boundaries were observed after superplastic deformation, supporting the slip-accommodated grain and/or phase boundary sliding.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable