Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T02:33:06.176Z Has data issue: false hasContentIssue false

Two-step oxygen injection process for growing ZnO nanorods

Published online by Cambridge University Press:  31 January 2011

Yung-Kuan Tseng
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Bldg. 77, 195 Section 4 Chung Hsing Road, Chutung, Hsinchu 310, Taiwan, Republic of China
Hsu-Cheng Hsu
Affiliation:
Institute of Electro-Optical Engineering, National Chiao Tung University, 1001 Tahsueh Road, Hsinchu 300, Taiwan, Republic of China
Wen-Feng Hsieh
Affiliation:
Institute of Electro-Optical Engineering, National Chiao Tung University, 1001 Tahsueh Road, Hsinchu 300, Taiwan, Republic of China
Kuo-Shung Liu
Affiliation:
Department of Material Science and Engineering, National Tsing-Hua University, 101, Section 2 Kuang Fu Road, Hsinchu 300, Taiwan, Republic of China
I-Cherng Chen
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Bldg. 77, 195 Section 4 Chung Hsing Road, Chutung, Hsinchu 310, Taiwan, Republic of China
Get access

Abstract

Uniform hexagonal prismatic zinc oxide rods were grown over the entire alumina substrate at 550°C using a two-step oxygen injection process, whether the substrates were coated with a catalyst or not. X-ray diffraction showed that all of the depositions exhibited a preferred orientation in the (002) plane. The influence of oxygen concentration was investigated by changing the oxygen flow rate. Oxygen concentration affected the size of ZnO nanorods, especially the diameter. The ZnO nanorods were further checked using high-resolution transmission electron microscopy, photoluminescence, Raman spectroscopy, and room-temperature ultraviolet lasing. The results showed that the rods were single crystals and had excellent optical properties. By observing the growth process, we found that the diameter increased slowly, but the longitudinal growth rate was very high. The growth of ZnO nanorods revealed that the uniform hexagonal prismatic ZnO nanorods were synthesized through vapor deposition growth and a self-catalyzed vapor–liquid–solid (VLS) process.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable