Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T10:27:20.674Z Has data issue: false hasContentIssue false

VHF a–Si: H solar cells: A systematic material and cell study

Published online by Cambridge University Press:  31 January 2011

W. G. J. H. M. van Sark
Affiliation:
Department of Atomic and Interface Physics, Debye Institute, Utrecht University, P.O. Box 80000, NL-3508 TA Utrecht, The Netherlands
J. Bezemer
Affiliation:
Department of Atomic and Interface Physics, Debye Institute, Utrecht University, P.O. Box 80000, NL-3508 TA Utrecht, The Netherlands
W. F. van der Weg
Affiliation:
Department of Atomic and Interface Physics, Debye Institute, Utrecht University, P.O. Box 80000, NL-3508 TA Utrecht, The Netherlands
Get access

Extract

A systematic study of material quality has been performed for intrinsic a–Si:H layers deposited by plasma enhanced chemical vapor deposition at excitation frequencies between 30 and 80 MHz (VHF). The process conditions were optimized not only for “device quality” opto-electronic properties but also for a uniformity in layer thickness better than 5% over the 10 cm × 10 cm substrate area. We found optimized homogeneities at different pressures depending on the excitation frequency. The effect of frequency at these optimum conditions on the material quality is small. VHF-intrinsic layers have been used in a–Si:H p+-i-n+ solar cells, in which both the p+ and n+ layer were made using 13.56 MHz. There is a clear correlation between material quality and solar cell parameters. Material deposited at low power densities is of so-called “device quality,” which is confirmed by demonstrating an initial efficiency of 10% for cells deposited at 65 MHz using a low power density. The deposition rate still is 2–3 times higher than the one at 13.56 MHz. Light-soaking of the cell leads to stabilization at 6% for the best cells, which compares well to conventional 13.56 MHz cells.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable