Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T11:57:28.401Z Has data issue: false hasContentIssue false

An effective Cu-Sn barrier layer for Au bump used in optoelectronic devices

Published online by Cambridge University Press:  03 March 2011

C.Y. Liu*
Affiliation:
Department of Chemical Engineering and Materials Engineering, National Central University, Chung-Li, Taiwan, Republic of China
S.J. Wang
Affiliation:
Department of Chemical Engineering and Materials Engineering, National Central University, Chung-Li, Taiwan, Republic of China
*
a) Address all correspondence to this author. e-mail: chengyi@cc.ncu.edu.tw
Get access

Abstract

By studying reactions between Au foils and Sn(Cu) alloys, we found that the Au consumption rate depended on the Cu-content of the Sn(Cu) solders. The higher Cu-content alloys had faster Au consumption rates. When the Au foil was pre-coated with a Ni layer and then reacted with Sn(Cu) alloys having a Cu-content of morethen 1.5 wt%, a stable ternary (Cu,Ni)6Sn5 compound layer was observed on theAu foil. This ternary compound layer then served as a barrier layer that effectively prevented the Au foil from reacting with the molten solder. This result enabled the implementation of a flip-chip assembly process for the fabrication of optoelectronic devices.

Keywords

Information

Type
Rapid Communications
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable