Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T05:10:07.975Z Has data issue: false hasContentIssue false

Atomic scale oxide superlattices grown by RHEED controlled pulsed laser deposition

Published online by Cambridge University Press:  03 March 2011

T.M. Shaw
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, New York 10598
A. Gupta
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, New York 10598
M.Y. Chern
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, New York 10598
P.E. Batson
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, New York 10598
R.B. Laibowitz
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, New York 10598
B.A. Scott
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, New York 10598
Get access

Abstract

By depositing thin films under conditions where intensity oscillations are observed in RHEED (reflection high-energy electron diffraction) spots, unit cell level multilayers of SrTiO3/BaTiO3 structures have been grown by pulsed laser ablation. High resolution TEM (transmission electron microscopy) and STEM (scanning transmission electron microscopy) observations of the deposits show that epitaxial multilayers with layer thicknesses of 1, 2, 4, 8, and 16 unit cells can be grown on [100] orientation SrTiO3 substrates. The superlattices show partial intermixing of the Sr and Ba for layer thicknesses less than 8 unit cells, but incomplete intermixing occurs even when the layers are only a single unit cell thick. From observations of the degree of intermixing at different depths in the deposit, it was determined that most of the intermixing takes place during deposition and not during subsequent annealing of the deposit. The 16 and 8 unit cell thick BaTiO3 layers were found to be tetragonal with the c-axis of the layers oriented normal to the substrate but with the a-axis strained to coherently match the SrTiO3 layers.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable