Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T03:26:45.588Z Has data issue: false hasContentIssue false

Biomimetic systems and design in the 3D characterization of the complex vascular system of bamboo node based on X-ray microtomography and finite element analysis

Published online by Cambridge University Press:  28 August 2019

Felipe Luis Palombini*
Affiliation:
Graduate Program in Design—PGDesign, Federal University of Rio Grande do Sul—UFRGS, Porto Alegre, RS 90035-190, Brazil
Fernanda Mayara Nogueira
Affiliation:
Laboratory of Plant Anatomy—LAVeg, Department of Botany—UFRGS, Institute of Biosciences, Porto Alegre, RS 91540-000, Brazil; and Graduate Program in Botany, Institute of Biosciences—UFRGS, Porto Alegre, RS 91540-000, Brazil
Wilson Kindlein Junior
Affiliation:
Graduate Program in Design—PGDesign, Federal University of Rio Grande do Sul—UFRGS, Porto Alegre, RS 90035-190, Brazil; and Department of Materials—DEMAT, Federal University of Rio Grande do Sul—UFRGS, Porto Alegre, RS 90035-190, Brazil
Sidnei Paciornik
Affiliation:
Department of Chemical and Materials Engineering—DEQM, Pontifical Catholic University of Rio de Janeiro—PUC-Rio, Rio de Janeiro, RJ 22453-900, Brazil
Jorge Ernesto de Araujo Mariath
Affiliation:
Laboratory of Plant Anatomy—LAVeg, Department of Botany—Federal University of Rio Grande do Sul—UFRGS, Institute of Biosciences, Porto Alegre, RS 91540-000, Brazil
Branca Freitas de Oliveira
Affiliation:
Graduate Program in Design—PGDesign, Federal University of Rio Grande do Sul—UFRGS, Porto Alegre, RS 90035-190, Brazil; and Department of Design and Graphic Expression—DEG, Federal University of Rio Grande do Sul—UFRGS, Porto Alegre, RS 90035-190, Brazil
*
a)Address all correspondence to this author. e-mail: felipe.palombini@ufrgs.br

Abstract

Bamboo is a natural composite and one of the most efficient structures in nature because of the relationship of mechanical properties with its microstructural features. This research presents the 3D characterization of the reinforcement bundles of a branching nodal region of bamboo, through high-resolution X-ray microtomography (µCT). µCT was used to characterize a sample regarding the volume, relative density, and porosity of parenchyma and sclerenchyma tissues, and the resulting data were used to estimate their constitutive properties. A nonlinear finite element analysis (FEA) was performed based on a discretized model of the µCT to the limiting compressive load. Secondary bundles presented an interweaved arrangement into the primary vascular elements that distribute axial compressive stresses into new branches. Our findings suggest that the foam-like behavior of the parenchyma, the sclerenchyma thickening above the nodal zone, and the nodal vascular branching are ways for bamboo to protect important tissues from mechanical stress by allocating axial loads. In addition, such mechanism could be applied in the design of biomimetic structures with selective load-bearing capabilities.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © Materials Research Society 2019
Figure 0

Figure 1:Bamboo main macrostructural and microstructural features: (a) stem segmentation of regions of nodes and internodes, where SAM is the shoot apical meristem, and IM is the intercalary meristem; (b) internode cross-section showing the atactostele gradient distribution of the vascular bundles, from the inner to the outer side of the stem; (c) tissues encompassing the vascular elements, where Pa is the parenchyma and Sc is the sclerenchyma bundles.

Figure 1

Figure 2:µCT 3D reconstruction of the nodal region of bamboo with secondary branches. Details a–g present µCT slices (from the bottom up of the sample) showing the development of leaves sheaths and stem branches, highlighting the anastomosis of vascular bundles while connecting the main axis (green) to the secondary axes (purple, yellow, and red). Scale bars = 1 mm.

Figure 2

Figure 3:3D reconstruction of vascular bundles from µCT of the nodal bamboo region with secondary branching: (a) vascular bundles of the main axis interweaving with the ones of the secondary axes; (b) vascular bundles of the secondary axes only; (c) details of the transversal movement of secondary vascular bundles. Scale bars = 1 mm.

Figure 3

Figure 4:Relative volume (%) and relative density (ρ*/ρS) of parenchyma and sclerenchyma related to each transversal slice position of the µCT-segmented nodal bamboo. Dotted and dashed lines represent the average values of ρ*/ρS for the parenchyma and sclerenchyma, respectively.

Figure 4

Figure 5:Meshing process for the FEA of the µCT-based nodal region of bamboo: (a) discretized assembly model with the regions of parenchyma (white) and sclerenchyma (green); (b) sclerenchyma region only, by hiding the parenchyma mesh elements; (c) detail of the tetrahedral mesh of the assembly. Mesh elements contours were hidden in A and B to improve the visualization of the 3D model.

Figure 5

Figure 6:The von Mises stress results at the compressive failure of the µCT-based FEA of the nodal region of bamboo: (a) parenchyma elements set only, and internal view cut; (b) sclerenchyma elements set only. Mesh elements contours were hidden to improve the visualization of the colored regions.

Figure 6

Figure 7:Sample preparation of bamboo (B. tuldoides) for X-ray microtomography: (a) top portion of the stem; (b) nodal region of the apical stem of the specimen, consisted of a primary axis generating lateral sheaths and buds; (c) cross-sectioning of the sample; (d) sectioned sample; (e) µCT projection.

Figure 7

Figure 8:X-ray microtomography image stack processing on nodal bamboo sample: (a) original slice and detail (a1) of the noise in a region; (b) image filtered with non-local means denoising filter and detail (b1) of the same region after noise reduction; (c) manually segmented sclerenchyma of vascular bundles from primary axis (green) and secondary axes (purple, yellow, and red); (d) binary masks of segmented bundles.