Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T23:12:12.694Z Has data issue: false hasContentIssue false

Characterization of metallurgical grade silicon

Published online by Cambridge University Press:  31 January 2011

J. C. Anglézio
Affiliation:
Laboratoire de Métallurgie Structurale, U.A. CNRS 1107, UPS 91405, OrsayCedex, France
C. Servant
Affiliation:
Laboratoire de Métallurgie Structurale, U.A. CNRS 1107, UPS 91405, OrsayCedex, France
F. Dubrous
Affiliation:
Laboratoire d'Electrothermie de Chedde, Péchiney Electrométallurgie, 74190 Le Fayet, France
Get access

Abstract

Optical metallography, scanning electron microscopy, electron microprobe analysis, and transmission electron microscopy were used to characterize metallurgical grade silicon, produced in an electric are furnace. Coincidence fraction determinations were assumed to be Σ7 and Σ9 when grain boundaries are underlined by precipitated phases and Σ3 when they are not. The study of intergranular compounds was emphasized; ten compounds were found, the main ones being Si2Ca, Si8Al6Fe4Ca, Si2Al2Ca, Si2FeTi, and Si2.4Fe (α leboitc). The precipitation of these compounds was discussed according to the principal impurity concentrations in silicon. The crystalline structure of Si8Al6Fe4Ca was determined to be triclinic with a = 1.3923 nm, b = 1.3896 nm, c = 1.3900 nm and α = 92.4°, β = 110.3°, γ = 119.9°.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable