Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T04:34:08.641Z Has data issue: false hasContentIssue false

Combustion of zirconium foils in oxygen

Published online by Cambridge University Press:  31 January 2011

K. H. Ewald
Affiliation:
Facility for Advanced Combustion Synthesis (FACS), Department of Chemical Engineering and Materials Science, University of California, Davis, California 95616
U. Anselmi-Tamburini
Affiliation:
Department of Physical Chemistry, University of Pavia, Pavia, Italy
Z. A. Munir*
Affiliation:
Facility for Advanced Combustion Synthesis (FACS), Department of Chemical Engineering and Materials Science, University of California, Davis, California 95616
*
a)Address all correspondence to this author.zamunir@ucdavis.edu
Get access

Abstract

The combustion of zirconium foils in an oxygen environment was investigated for foils ranging in thickness from about 22 to 124 μm and for oxygen partial pressures ranging from about 0.3 to 0.9 atm. Temperature profile measurements showed indications of an after-burn, which became especially significant in the combustion of thicker foils. The dependence of the combustion wave temperature and velocity on the oxygen partial pressure was determined. For any partial pressure, wave velocity decreased with an increase in foil thickness. Wave propagation in this system is a complex process and is dictated by oxide formation and oxygen dissolution. The results are examined in light of a finite difference model.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable