Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T10:48:17.739Z Has data issue: false hasContentIssue false

Composites based on thermally hyper-conductive vapor grown carbon fiber

Published online by Cambridge University Press:  03 March 2011

Jyh-Ming Ting
Affiliation:
Applied Sciences. Inc., Cedarville, Ohio 45314
Max L. Lake
Affiliation:
Applied Sciences. Inc., Cedarville, Ohio 45314
David R. Duffy*
Affiliation:
Applied Sciences. Inc., Cedarville, Ohio 45314
*
a)Current address: Dana Corporation, Fort Wayne, Indiana 46807.
Get access

Abstract

Aluminum matrix composites and carbon/carbon composites based on vapor grown carbon fiber (VGCF) were fabricated for analysis of thermophysical properties. Due to the highly graphitic nature of VGCF, the resulting composites exhibit values of thermal conductivity that have not been achieved by using any other carbon fibers, and thus represent new materials for thermal management in applications such as packaging for high-power, high-density electronic devices. In the aluminum matrix VGCF composites, a thermal conductivity of 642 W/m-K was obtained by using a VGCF loading of only 36.5 vol.%. For VGCF/C composites, thermal conductivity of 910 W/m-K has been observed, a value which is more than a factor of two higher than that of copper. Based on the observed thermal conductivity of VGCF/Al composites and VGCF/C composites, the room temperature thermal conductivity of VGCF in the composite was calculated to be 1460 W/m-K and 1600 W/m-K, respectively.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable