Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T07:23:51.267Z Has data issue: false hasContentIssue false

Composition analysis of thin AlxGa1−xAs layers with TEM and SIMS

Published online by Cambridge University Press:  31 January 2011

A. F. de Jong
Affiliation:
Philips Research Laboratories WY2, P.O. Box 80000, 5600 JA Eindhoven, The Netherlands
K. T. F. Janssen
Affiliation:
Philips Research Laboratories WY2, P.O. Box 80000, 5600 JA Eindhoven, The Netherlands
Get access

Abstract

In this paper two methods for measuring aluminum compositions in very thin (1.5–15 nm), individual AlxGa1–xAs layers are investigated. The transmission electron microscopy (TEM) thickness-fringe method uses the bright-field extinction fringes from a small, cleaved 90° wedge imaged in a [100] orientation. By comparing calculated and experimental extinction fringes, compositions are determined with a sensitivity in x of 0.03, in layers with a thickness of 3.5 nm. With secondary ion mass spectrometry (SIMS), compositions in AlxGa1–xAs layers with a thickness of 15 nm are measured with an accuracy in x between 0.02 and 0.05. Thicker layers (1 μm) with a composition known from x-ray diffraction measurements are used as a reference for both methods. Subsequently, TEM results are compared with SIMS and the reference measurements. The overall agreement is good, but for 0.25 < x < 0.65, the values of x found by TEM are systematically 0.05 too low. Using the SIMS and reference measurements as a calibration, compositions can be determined by TEM with an accuracy between 0.03 (low x) and 0.05 (high x) in layers as thin as 1.5 nm.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable