Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T20:54:48.490Z Has data issue: false hasContentIssue false

Correlation between microstructure and mechanical properties in silicon carbide with alumina addition

Published online by Cambridge University Press:  31 January 2011

S.S. Shinozaki
Affiliation:
Research Staff, Scientific Research Laboratories, Ford Motor Company, Dearborn, Michigan 48121
J. Hangas
Affiliation:
Research Staff, Scientific Research Laboratories, Ford Motor Company, Dearborn, Michigan 48121
K.R. Carduner
Affiliation:
Research Staff, Scientific Research Laboratories, Ford Motor Company, Dearborn, Michigan 48121
M.J. Rokosz
Affiliation:
Research Staff, Scientific Research Laboratories, Ford Motor Company, Dearborn, Michigan 48121
K. Suzuki
Affiliation:
Research Center, Asahi Glass Company, Yokohama, Japan
N. Shinohara
Affiliation:
Research Center, Asahi Glass Company, Yokohama, Japan
Get access

Abstract

The microstructure of pressureless sintered silicon carbide (SiC) materials with alumina (Al2O3) addition was investigated using analytical electron microscopy and nuclear magnetic resonance. A sintered body with a density of higher than 99% theoretical was obtained with an addition of 5 wt.% Al2O3. The sintered body (SiC–Al2O3) has high strength, high fracture toughness, and high fatigue resistance. Its fracture toughness is approximately 5 MPa-m1/2, which is twice as high as that of pressureless sintered SiC materials with boron and carbon additions (SiC–B–C). The correlation between the microstructure and the mechanical properties is presented here. The starting β–SiC powder is mostly transformed to α–SiC with various polytype distributions during the sintering process. The microstructure has homogeneously distributed, fine, plate-like interlocking gains with a high aspect ratio. Well-developed basal planes form parallel and elongated boundaries, and the crystal structure is mostly the 6H polytype (56%) mixed with thin lamellar 4H.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable