Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T10:19:38.726Z Has data issue: false hasContentIssue false

Crack progression and interface debonding in brittle/ductile nanoscale multilayers

Published online by Cambridge University Press:  03 March 2011

D.K. Leung
Affiliation:
Materials Department, College of Engineering, University of California. Santa Barbara, Santa Barbara, California 93106-5050
N.T. Zhang
Affiliation:
Materials Department, College of Engineering, University of California. Santa Barbara, Santa Barbara, California 93106-5050
R.M. McMeeking
Affiliation:
Materials Department, College of Engineering, University of California. Santa Barbara, Santa Barbara, California 93106-5050
A.G. Evans
Affiliation:
Materials Department, College of Engineering, University of California. Santa Barbara, Santa Barbara, California 93106-5050
Get access

Abstract

Crack initiation and progression have been studied in nanoscale brittle/ductile multilayers of Cu and Si. Variations in the interface debond energy on the cracking behavior have been examined by using thin interlayers comprising either Cr (strong interface) or Au (weak interface). For strongly bonded Cr interfaces, it has been found that cracks forming in the Si invariably extend through the Cu layers, despite the ductile rupture characteristics of the Cu. This behavior occurs even when the Cu layers comprise more than 70% of the multilayer volume. It also contrasts with the crack arrest capabilities exhibited by relatively thick ductile layers (∼10-100 μm). The disparity in behavior is attributed to the relatively large cracking strain required for the thin brittle layers. Weak Au interfaces result in debonding which, in turn, can suppress the propagation of cracks into adjacent layers. However, when the interface includes strongly bonded sections, the debond arrests, and often kinks into the attached Si. In this case, cracking still progresses sequentially through the Si layers. Careful control of the interface debond energy is needed to fully suppress crack progression in nanoscale multilayers.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable