Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T06:47:45.190Z Has data issue: false hasContentIssue false

Creep behavior of eutectic Sn–Ag lead-free solder alloy

Published online by Cambridge University Press:  26 July 2012

M. L. Huang
Affiliation:
Department of Materials Engineering, Dalian University of Technology, Dalian 116024, People's Republic of China
L. Wang
Affiliation:
Department of Materials Engineering, Dalian University of Technology, Dalian 116024, People's Republic of China
C. M. L. Wu*
Affiliation:
Department of Physics and Materials Science, City University of Hong Kong, 83 Tat Chee Avenue, Hong Kong SAR, People's Republic of China
*
a) Address all correspondence to this author. e-mail: Lawrence.Wu@cityu.edu.hk
Get access

Abstract

Precipitation-strengthened tin-based eutectic Sn–3.5 Ag alloy was investigated for its creep behavior at three temperatures ranging from 303 to 393 K, under the tensile stress range of σ/E = 10−4 to 10−3. The steady-state creep rates cover seven orders of magnitude (10−3 to 10−9 s−1). The initial microstructure was found to have Ag3Sn intermetallic compound finely dispersed in the matrix of β–Sn. By incorporation of a threshold stress, σth, into the analysis, the creep data of eutectic Sn–Ag at all temperatures can be fitted by a single straight line with a slope of seven after normalizing the steady-state creep rate and the effective stress, indicating that the creep rates are controlled by the dislocation-pipe diffusion in the Sn matrix. The steady-state creep rate, , can then be expressed as , where QC is the creep activation energy, G is the temperature-dependent shear modulus, b is Burger's vector, R is the universal gas constant, T is the absolute temperature, σ is the applied stress, A is a material-dependent constant, and , in which σOB is the Orowan bowing stress and kR is the relaxation factor.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable